Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 5 firmware versions
Vehicle data
| Brand | AUDI |
| Model | A4 (B8/8K) |
| Engine | 2.0L 16V TFSI 155kW/208HP DSG DL501 GEN1 |
| Stock power | 211 CV / 155 kW |
| Displacement | 2000 cc |
| Fuel | Benzina sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | TEMIC |
| Model | DL501 GEN1 |
| Memory / EPROM | MICRO ST TRICORE - 12032 Kbit - 178000 |
Available tuning operations / options:
- Gear downshift 2->1
- Gear downshift 3->2
- Gear downshift 4->3
- Gear downhift 5->4
- Gear downshift 6->5
- Gear downshift 7->6
- Maximum time for gear downshift
- Gear upshift 1->2
- Gear upshift 2->3
- Gear upshift 3->4
- Gear upshift 4->5
- Gear upshift 5->6
- Gear upshift 6->7
- Maximum torque limitation at clutch
- Gearbox torque limiter
- Gearbox torque limiter - active slip
- Gearbox torque limiter for ECT sensor
- Solenoid current for oil pressure
- Minimum oil pressure allowed at the clutch
- Maximum oil pressure allowed at the clutch
- Desired clutch oil pressure
- Maximum upshifting time for 2 gears
- Maximum upshifting time for 3 gears
- Maximum upshifting time for 4 gears
- Maximum upshifting time for 5 gears
- Maximum clutch oil pressure
- Oil pressure correction based on TOT
- Oil pressure required while moving
- S-DS
- S-US
- Clutch torque limit during acceleration - gear R
Firmware identifiers (5)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 0B5927156E | A02087 |
1.00.011 | 8K1927156AA 0006 |
TEMIC DL501 GEN1 |
| 0B5927156E | A02044 |
1.00.008 | 8K1927156 0003 |
TEMIC DL501 GEN1 |
| 0B5927156F | A02196 |
1.00.005 | 8K1927156P 0008 |
TEMIC DL501 GEN1 |
| 0B5927156F | A02087 |
1.00.008 | 8K1927156G 0009 |
TEMIC DL501 GEN1 |
| 0B5927156F | A02087 |
1.00.005 | 8K1927156H 0004 |
TEMIC DL501 GEN1 |
Vehicle technical notes
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU notes
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius.
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
