AUDI A4 (B8/8K) 2.0L 16V TDI 125kW/168HP EDC17CP14
ECU BOSCH EDC17CP14 · 170 CV (125 kW) · 2000 cc · Diesel sovralimentato
ECU Database ›
AUDI › AUDI A4 (B8/8K) 2.0L 16V TDI 125kW/168HP EDC17CP14
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 26 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | AUDI |
| Model | A4 (B8/8K) |
| Engine | 2.0L 16V TDI 125kW/168HP EDC17CP14 |
| Stock power | 170 CV / 125 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC17CP14 |
| Memory / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Available tuning operations / options:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period 3
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- J
- L
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
- Variable geometry duty cycle limit 5
- Variable geometry duty cycle limit in regeneration mode
Firmware identifiers (26)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| — | — | 1.00.014 | 03L906022KC 9979 | BOSCH EDC17CP14 |
| — | — | 1.94.024 | 03L906022KC 5525 | BOSCH EDC17CP14 |
| — | — | 1.00.015 | 03L906022K 3208 | BOSCH EDC17CP14 |
| — | — | 1.94.009 | 03L906022MH 8452 | BOSCH EDC17CP14 |
| — | — | 1.00.011 | 03L906022L 9978 | BOSCH EDC17CP14 |
| — | — | 1.00.019 | 03L906022KC 3208 | BOSCH EDC17CP14 |
| — | — | 1.00.018 | 03L906022L 3209 | BOSCH EDC17CP14 |
| — | — | 1.94.011 | 03L906022M 3761 | BOSCH EDC17CP14 |
| — | — | 1.94.008 | 03L997012Q 0419 | BOSCH EDC17CP14 |
| — | — | 1.94.012 | 03L906022RK 9979 | BOSCH EDC17CP14 |
| — | — | 1.00.016 | 03L906022L 8466 | BOSCH EDC17CP14 |
| — | — | 1.00.002 | 03L906022L 9980 | BOSCH EDC17CP14 |
| — | — | 1.94.013 | 03L906022MH 9979 | BOSCH EDC17CP14 |
| — | — | 1.94.003 | 03L906022RK 9980 | BOSCH EDC17CP14 |
| — | — | 1.00.015 | 03L906022L 5490 | BOSCH EDC17CP14 |
| — | — | 1.00.007 | 03L906022KC 8468 | BOSCH EDC17CP14 |
| — | — | 1.94.005 | 03L906022MR 8451 | BOSCH EDC17CP14 |
| — | — | 1.94.012 | 03L906022RK 9970 | BOSCH EDC17CP14 |
| — | — | 1.00.023 | 03L906022FG 4397 | BOSCH EDC17CP14 |
| — | — | 1.00.009 | 03L906022MH 5520 | BOSCH EDC17CP14 |
| — | — | 1.94.017 | 03L906022RK 4402 | BOSCH EDC17CP14 |
| — | — | 1.94.014 | 03L906022MR 9978 | BOSCH EDC17CP14 |
| — | — | 1.94.006 | 03L906022RK 8455 | BOSCH EDC17CP14 |
| — | — | 1.00.020 | 03L906022MH 4382 | BOSCH EDC17CP14 |
| — | — | 1.94.029 | 03L906022MR 4381 | BOSCH EDC17CP14 |
| — | — | 1.00.011 | 03L906022KC 9978 | BOSCH EDC17CP14 |
Vehicle technical notes
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU notes
MICRO Infineon Tricore TC1796 It is possible to support this ECU via OBDII using NewGenius and protocol FLASH_0506 WITHOUT PERFORMING the unlock patch and starting always from a 16Mbit TOTAL size file. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. On this ECU it is NOT possible to use any BDM system (Trasdata nor 555pro).
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
Other AUDI
100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP