AUDI A4 (B8/8K) 2.0L 16V TDI 100kW/134HP EDC17CP20 — ECU BOSCH EDC17CP20

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 13 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	AUDI
Model	A4 (B8/8K)
Engine	2.0L 16V TDI 100kW/134HP EDC17CP20
Stock power	136 CV / 1 kW
Displacement	2000 cc
Fuel	Diesel sovralimentato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	EDC17CP20
Memory / EPROM	SPANSION S29CD016

Available tuning operations / options:

Smoke limiter 2
Boost pressure limiter
Boost pressure
Boost pressure 2
Boost pressure 3
Regeneration limit for DPF
EGR valve control
EGR valve control 2
EGR valve control 3
EGR valve control 4
Injection at part load
J
Torque limiter 2
Torque limiter
Smoke limiter
Specific injection pressure
Specific injection pressure 2
Air mass flow
Overboost timing
Overboost timing 3

Firmware identifiers (13)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	—	1.00.005	03L906022TK 5497	BOSCH EDC17CP20
—	—	1.00.012	03L906019C 9979	BOSCH EDC17CP20
—	—	1.94.013	03L906019AT 9979	BOSCH EDC17CP20
—	—	1.00.020	03L906019C 8428	BOSCH EDC17CP20
—	—	1.94.016	03L906019AT 5069	BOSCH EDC17CP20
—	—	1.00.015	03L906019C 6031	BOSCH EDC17CP20
—	—	1.00.023	03L906019AT 5486	BOSCH EDC17CP20
—	—	1.94.011	03L906022TK 9978	BOSCH EDC17CP20
—	—	1.94.008	03L906019AT 6030	BOSCH EDC17CP20
—	—	1.00.015	03L997017F 0358	BOSCH EDC17CP20
—	—	1.00.017	03L997017C 0332	BOSCH EDC17CP20
—	—	1.00.002	03L906019C 9980	BOSCH EDC17CP20
—	—	1.94.008	03L906019AT 9980	BOSCH EDC17CP20

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata