AUDI A4 (B6/8E/8H) 2.0L 16V FSI 110kW/148HP MED7.1.1

ECU BOSCH MED7.1.1 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU DatabaseAUDI › AUDI A4 (B6/8E/8H) 2.0L 16V FSI 110kW/148HP MED7.1.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 6 firmware versions

Vehicle data

BrandAUDI
ModelA4 (B6/8E/8H)
Engine2.0L 16V FSI 110kW/148HP MED7.1.1
Stock power150 CV / 11 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED7.1.1
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Air mass flow

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261S010061037367243 1.21.0078E0906018K 0008 BOSCH MED7.1.1
0261S010061037369725 1.21.0118E0906018K 0009 BOSCH MED7.1.1
0261S010061037366885 1.21.0038E0906018K 0007 BOSCH MED7.1.1
0261S010231037368341 1.21.0038E1910018 0020 BOSCH MED7.1.1
0261S010231037369001 1.21.0028E1910018 0030 BOSCH MED7.1.1
0261S010361037369747 1.21.0078E1910018D 0010 BOSCH MED7.1.1

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.