AUDI A3 (8L) 1.8L 20V TURBO 110KW/148HP PSOP Motronic

ECU BOSCH MOTRONIC M3.8.3 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU DatabaseAUDI › AUDI A3 (8L) 1.8L 20V TURBO 110KW/148HP PSOP Motronic

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 7 firmware versions

Vehicle data

BrandAUDI
ModelA3 (8L)
Engine1.8L 20V TURBO 110KW/148HP PSOP Motronic
Stock power150 CV / 11 kW
Displacement1800 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMOTRONIC M3.8.3
Memory / EPROME28F200 PSOP44 2Mbit - Flash 128k x 16

Available tuning operations / options:

  • Advance at part load
  • Boost pressure limiter
  • Boost pressure
  • Injection at idle speed
  • Injection at part load
  • Injection correction
  • Injection at full throttle
  • Speed / RPM limiter
  • Pressure control F (RPM)
  • Boost at full throttle
  • Air mass flow
  • Overboost timing

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612046781037358108 1.33.014 BOSCH MOTRONIC M3.8.3
02612046781037359525 1.33.013 BOSCH MOTRONIC M3.8.3 DAMOS 30P
02612046781037350010 1.33.004 BOSCH MOTRONIC M3.8.3 DAMOS 30P
02612046791037358104 1.33.004 BOSCH MOTRONIC M3.8.3 DAMOS 30P
02612046791037359522 1.33.010 BOSCH MOTRONIC M3.8.3 DAMOS 30P
02612065151037352014 1.33.028 BOSCH MOTRONIC M3.8.3 DAMOS 30P
02612065161037350781 1.33.024 BOSCH MOTRONIC M3.8.3 DAMOS 30P

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.