Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 2 firmware versions
Vehicle data
| Brand | AUDI |
| Model | A2 (8Z) |
| Engine | 1.6L 16V FSI 81kW/109HP MED7.5.11 |
| Stock power | 110 CV / 81 kW |
| Displacement | 1600 cc |
| Fuel | Benzina aspirato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | MED7.5.11 |
| Memory / EPROM | 29F800 PSOP44 8Mbit - Flash 512K x 16 |
Available tuning operations / options:
- Advance at part load
- Load / throttle position reference
- Injection at part load
- Advance limiter
- Torque limiter
- Air mass flow
Firmware identifiers (2)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 0261S01009 | 1037366152 |
1.21.027 | 036906013F 4628 |
BOSCH MED7.5.11 |
| 0261S01009 | 1037368005 |
1.21.009 | 036906013F 5130 |
BOSCH MED7.5.11 |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
