AUDI A2 (8Z) 1.2L 12V TDI 45kW/60HP EDC15 P/P+

ECU BOSCH EDC15P+ · 61 CV (45 kW) · 1200 cc · Diesel sovralimentato

ECU DatabaseAUDI › AUDI A2 (8Z) 1.2L 12V TDI 45kW/60HP EDC15 P/P+

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 4 firmware versions

Vehicle data

BrandAUDI
ModelA2 (8Z)
Engine1.2L 12V TDI 45kW/60HP EDC15 P/P+
Stock power61 CV / 45 kW
Displacement1200 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC15P+
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Pre-injection basic value 2
  • Air mass flow
  • Overboost timing

Firmware identifiers (4)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810102271037362780 1.13.022045906019D 1452 BOSCH EDC15P+
02810112391037369866 1.40.005045906019BL 5715 BOSCH EDC15P+
02810112391037366716 1.40.004045906019BL 4919 BOSCH EDC15P+
02810117641037369867 1.40.001045997019 5714 BOSCH EDC15P+

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop