ALFA ROMEO SPIDER 3.2L V6 24V JTS 191kW/256HP MED7.6.2

ECU BOSCH MED7.6.2 · 260 CV (191 kW) · 3200 cc · Benzina aspirato

ECU DatabaseALFA ROMEO › ALFA ROMEO SPIDER 3.2L V6 24V JTS 191kW/256HP MED7.6.2

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandALFA ROMEO
ModelSPIDER
Engine3.2L V6 24V JTS 191kW/256HP MED7.6.2
Stock power260 CV / 191 kW
Displacement3200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED7.6.2
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Specific injection pressure
  • Load/throttle position reference - AT
  • Air mass flow
  • S

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261S010501037382541 1.93.002 BOSCH MED7.6.2

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius.