Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 1 firmware versions
Vehicle data
| Brand | ALFA ROMEO |
| Model | GIULIETTA |
| Engine | 1.4L 16V 77kW/104HP ME7.9.10 |
| Stock power | 105 CV / 77 kW |
| Displacement | 1400 cc |
| Fuel | Benzina sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | ME7.9.10 |
| Memory / EPROM | MICRO ST - 6656 Kbit |
Available tuning operations / options:
- Maximum air charge for overboost protection with turbocharger fault
- Base timing
- Advance at idle speed
- Optimal spark timing/MBT
- Spark advance correction for ECT sensor
- Boost pressure limiter 3
- Boost pressure limiter 4
- Boost pressure
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Compression ratio for turbocharger protection
- Exhaust gas temperature
- Factor to correct fuel delivery system
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- RPM Limiter 2
- RPM limiter 3
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Throttle air mass flow calculation
- Max torque profile
- Max torque profile (overboost active)
- Optimal engine moment
- Boost pressure threshold cycles for the overboost recognition
- Offset tolerance depending on permissible torque
- Power limit torque table
- Relative permissible torque from the pedal position in torque limitation
- Driver torque request
- Driver torque request for low speed
- Driver torque request for low speed in Sport mode
- Driver torque request for reverse gear
- Driver torque request Sport mode
- Throttle angle management
- Turbocharger volumetric efficiency
- Wastegate duty-cycle
Firmware identifiers (1)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 0261S07306 | 1037518434 |
1.91.019 | — |
BOSCH ME7.9.10 |
Vehicle technical notes
ECU located in the engine bay behind/close to the battery. Difficulty: easy
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU notes
Microprocessor ST10F275 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
