ALFA ROMEO 147 2.0L 16V TS 110kW/148HP ME7.3.1

ECU BOSCH ME7.3.1 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU DatabaseALFA ROMEO › ALFA ROMEO 147 2.0L 16V TS 110kW/148HP ME7.3.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 13 firmware versions

Vehicle data

BrandALFA ROMEO
Model147
Engine2.0L 16V TS 110kW/148HP ME7.3.1
Stock power150 CV / 11 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.3.1
Memory / EPROMHYBRID ECU - 4.096Kbit 0x80000

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Speed limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware identifiers (13)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612018751037387469 1.38.012 BOSCH ME7.3.1
02612067071277356512 1.38.02810A0Xw00 BOSCH ME7.3.1
02612067071277356443 1.38.007 BOSCH ME7.3.1
02612067081277356576 1.38.00310A0Xw00 BOSCH ME7.3.1
02612067081277356444 1.38.007 BOSCH ME7.3.1
02612067081277356526 1.38.011 BOSCH ME7.3.1
02612067081277356576 1.38.009 BOSCH ME7.3.1
02612073361277356479 1.38.00309a51x00 BOSCH ME7.3.1
02612073361277356521 1.38.002 BOSCH ME7.3.1
02612073371277356519 1.38.003 BOSCH ME7.3.1
02612073771277356477 1.38.00809a51x00 BOSCH ME7.3.1
02612077251037351952 1.38.01010A0Xw00 BOSCH ME7.3.1
02612086101037369622 1.38.004 BOSCH ME7.3.1

Vehicle technical notes

ECU located in the engine bay on the driver'side. Difficulty: easy.
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0018. Please read the manual handbook to connect the specific cable. WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection Note for the SELESPEED version: before disconnecting the ECU make sure that the gearbox is in idle position to avoid car blockage. In that case use the Examiner. If after a correct modification a fault code appears, simply turn on the engine and the fault will be reset automatically after some starts. This Setting File can be used for serial system : Genius or NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop