MERCEDES TRUCK ACTROS 2546 12L V6 335kW/449HP TEMIC

Steuergerät TEMIC TEMIC PLD · 455 CV (335 kW) · 12000 cc · Diesel sovralimentato

Steuergeräte-DatenbankMERCEDES TRUCK › MERCEDES TRUCK ACTROS 2546 12L V6 335kW/449HP TEMIC

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 8 Firmware-Versionen

Fahrzeugdaten

MarkeMERCEDES TRUCK
ModellACTROS
Motor2546 12L V6 335kW/449HP TEMIC
Serienleistung455 CV / 335 kW
Hubraum12000 cc
KraftstoffDiesel sovralimentato
FahrzeugtypTir

Steuergerät

HerstellerTEMIC
ModellTEMIC PLD
Speicher / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Verfügbare Tuning-Optionen:

  • Max. Schwellenwert Luftmassenstrom durch den Kompressor
  • Ladedruckbegrenzer
  • Motor Überhitzungsschutz Kennfeld
  • Motor Überhitzungsschutz Kennfeld 2
  • Motor Überhitzungsschutz Kennfeld 3
  • Basis Moment beim Anlassen des Motors
  • Motorleerlaufdrehzahl für ECT-Sensor
  • Einspritzwinkel
  • Einspritzwinkel 2
  • Einspritzwinkelkorrektur
  • PLD Förderwinkel
  • Rauchbegrenzer
  • Angegebener Maximaldrehmoment
  • Maximale Drehmoment Wert

Firmware-Kennungen (8)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
53G 1.54.120 TEMIC TEMIC PLD
56E 1.54.014 TEMIC TEMIC PLD
06A 1.54.013 TEMIC TEMIC PLD
24B 1.54.005 TEMIC TEMIC PLD
23E 1.54.010 TEMIC TEMIC PLD
05A 1.54.020 TEMIC TEMIC PLD
24B 1.54.009 TEMIC TEMIC PLD
11C 1.54.015 TEMIC TEMIC PLD

Steuergerät-Hinweise

Original EPROM TSOP 48 pins 29F200BB. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.
This Setting File can be used for serial system NewGenius.