MERCEDES TRUCK ACTROS 1860 16L V8 441kW/592HP TEMIC

Steuergerät TEMIC TEMIC PLD · 600 CV (441 kW) · 16000 cc · Diesel sovralimentato

Steuergeräte-DatenbankMERCEDES TRUCK › MERCEDES TRUCK ACTROS 1860 16L V8 441kW/592HP TEMIC

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 7 Firmware-Versionen

Fahrzeugdaten

MarkeMERCEDES TRUCK
ModellACTROS
Motor1860 16L V8 441kW/592HP TEMIC
Serienleistung600 CV / 441 kW
Hubraum16000 cc
KraftstoffDiesel sovralimentato
FahrzeugtypTir

Steuergerät

HerstellerTEMIC
ModellTEMIC PLD
Speicher / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Verfügbare Tuning-Optionen:

  • Max. Schwellenwert Luftmassenstrom durch den Kompressor
  • Ladedruckbegrenzer
  • Motor Überhitzungsschutz Kennfeld
  • Motor Überhitzungsschutz Kennfeld 2
  • Motor Überhitzungsschutz Kennfeld 3
  • Basis Moment beim Anlassen des Motors
  • Motorleerlaufdrehzahl für ECT-Sensor
  • Einspritzwinkel
  • Einspritzwinkel 2
  • Einspritzwinkelkorrektur
  • PLD Förderwinkel
  • Rauchbegrenzer
  • Angegebener Maximaldrehmoment
  • Maximale Drehmoment Wert

Firmware-Kennungen (7)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
07B 1.54.012 TEMIC TEMIC PLD
10B 1.54.018 TEMIC TEMIC PLD
06A 1.54.013 TEMIC TEMIC PLD
09D 1.54.015 TEMIC TEMIC PLD
24C 1.54.006 TEMIC TEMIC PLD
11C 1.54.014 TEMIC TEMIC PLD
22B 1.54.007 TEMIC TEMIC PLD

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.
This Setting File can be used for serial system NewGenius.