VOLVO V70 Mk2 2.3L 20V TURBO 177kW/237HP ME7.0

Calculateur BOSCH ME7.0 · 241 CV (177 kW) · 2300 cc · Benzina sovralimentato

Base de données calculateursVOLVO › VOLVO V70 Mk2 2.3L 20V TURBO 177kW/237HP ME7.0

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 12 versions firmware

Données véhicule

MarqueVOLVO
ModèleV70 Mk2
Moteur2.3L 20V TURBO 177kW/237HP ME7.0
Puissance d'origine241 CV / 177 kW
Cylindrée2300 cc
CarburantBenzina sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.0
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Limiteur de pression turbo
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de avance
  • Limiteur de couple
  • Contr. de stabilité pression turbo
  • Controle de la pression turbo max
  • Débit de masse d'air

Identifiants firmware (12)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612045591037359462 1.46.02040LKMA.a2l BOSCH ME7.0
02612045591037359462 1.46.02610l0mhde.a2l BOSCH ME7.0
02612045591037359462 1.46.01510j0mgde.a2l BOSCH ME7.0
02612045591037359462 1.46.01810g0mhde.a2l BOSCH ME7.0
02612045591037359462 1.46.00620FWHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.02410l0mhde.a2l BOSCH ME7.0
02612045591037359462 1.46.01420FQMA.a2l BOSCH ME7.0
02612045591037359462 1.46.01710g0mhde.a2l BOSCH ME7.0
02612045591037359462 1.46.0221xEKMH.a2l BOSCH ME7.0
02612045591037359462 1.46.01710nMHde.a2l BOSCH ME7.0
02612045591037359462 1.46.03120KPSC.a2l BOSCH ME7.0
02612045591037359462 1.46.00920FWHJ.a2l BOSCH ME7.0

Notes calculateur

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata