VOLVO TRUCK FM MK II 340 9.4L 250kW/335HP LUCAS

Calculateur LUCAS PLCC 28HC256 · 340 CV (25 kW) · 9400 cc · Diesel sovralimentato

Base de données calculateursVOLVO TRUCK › VOLVO TRUCK FM MK II 340 9.4L 250kW/335HP LUCAS

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 11 versions firmware

Données véhicule

MarqueVOLVO TRUCK
ModèleFM MK II
Moteur340 9.4L 250kW/335HP LUCAS
Puissance d'origine340 CV / 25 kW
Cylindrée9400 cc
CarburantDiesel sovralimentato
Type de véhiculeTir

Calculateur

FabricantLUCAS
ModèlePLCC 28HC256
Mémoire / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Opérations / options de tuning disponibles:

  • Injection au rallenti
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de couple 2
  • Limiteur de couple
  • Limiteur fumèes au rallentì
  • Limiteur de fumées charge partielle
  • Limiteur de fumeus à pleine charge

Identifiants firmware (11)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
1.55.004 LUCAS PLCC 28HC256
03161962XXXX6622 1.55.005 LUCAS PLCC 28HC256
03161962XXXX6222 1.55.002 LUCAS PLCC 28HC256
03161962XXXX2292 1.55.103 LUCAS PLCC 28HC256
03161962XXXX4638 1.55.003 LUCAS PLCC 28HC256
03161962XXXX4988 1.55.105 LUCAS PLCC 28HC256
03161962XXXX4486 1.55.004 LUCAS PLCC 28HC256
20577131XXXX2281 1.55.002 LUCAS PLCC 28HC256
20577131XXXX6222 1.55.107 LUCAS PLCC 28HC256
20577131XXXX4988 1.55.006 LUCAS PLCC 28HC256
20582958XXXX6222 1.55.003 LUCAS PLCC 28HC256

Notes calculateur

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.