VOLKSWAGEN CADDY MK3 (2K) 2.0L 8V ECOFUEL 80kW/107HP ME7.1.1

Calculateur BOSCH ME7.1.1 · 109 CV (8 kW) · 2000 cc · Metano

Base de données calculateursVOLKSWAGEN › VOLKSWAGEN CADDY MK3 (2K) 2.0L 8V ECOFUEL 80kW/107HP ME7.1.1

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 11 versions firmware

Données véhicule

MarqueVOLKSWAGEN
ModèleCADDY MK3 (2K)
Moteur2.0L 8V ECOFUEL 80kW/107HP ME7.1.1
Puissance d'origine109 CV / 8 kW
Cylindrée2000 cc
CarburantMetano
Type de véhiculeLCV

Calculateur

FabricantBOSCH
ModèleME7.1.1
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Limiteur de avance
  • Limiteur de couple
  • Enrichissement Lambda pour la protection des composants
  • Limiteur de cliquetis
  • Limiteur de vitesse
  • Limiteur de vitesse 2
  • Débit de masse d'air

Identifiants firmware (11)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
0261S056661037503783 1.84.00306G906022H 5183 BOSCH ME7.1.1
0261S056661037515863 1.84.00406G906022H 9003 BOSCH ME7.1.1
0261S056671037503686 1.84.00606G906022J 5182 BOSCH ME7.1.1
0261S059541037515850 1.84.00306G997022A 8973 BOSCH ME7.1.1
0261S061831037515846 1.84.00406G906022R 8976 BOSCH ME7.1.1
0261S061831037527763 1.84.01006G906022R 9970 BOSCH ME7.1.1
0261S061841037515844 1.84.00606G906022S 8977 BOSCH ME7.1.1
0261S061841037512103 1.84.01306G906022S 7684 BOSCH ME7.1.1
0261S089891037534219 1.84.00306G906022T 6012 BOSCH ME7.1.1
0261S089891037534219 1.84.00706G906022T 4220 BOSCH ME7.1.1
0261S089901037534220 1.84.00506G906022AA 6013 BOSCH ME7.1.1

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Modules additionnels disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop