VOLKSWAGEN BORA A4 2.0L 8V 85kW/114HP ME7.5

Calculateur BOSCH ME7.5 · 116 CV (85 kW) · 2000 cc · Benzina aspirato

Base de données calculateursVOLKSWAGEN › VOLKSWAGEN BORA A4 2.0L 8V 85kW/114HP ME7.5

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 10 versions firmware

Données véhicule

MarqueVOLKSWAGEN
ModèleBORA A4
Moteur2.0L 8V 85kW/114HP ME7.5
Puissance d'origine116 CV / 85 kW
Cylindrée2000 cc
CarburantBenzina aspirato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.5
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Limiteur de avance
  • Limiteur de couple
  • Enrichissement Lambda pour la protection des composants
  • Limiteur de cliquetis
  • Débit de masse d'air

Identifiants firmware (10)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612012711037379193 1.21.00606A906032TS 8122 BOSCH ME7.5
02612069081037350122 1.21.02506A906032BP 3656 BOSCH ME7.5
02612070801037360930 1.21.01306A906032DS 3892 BOSCH ME7.5
02612073651037362572 1.21.01706A906032FN 4071 BOSCH ME7.5
02612081261037368688 1.21.01206A906032NG 0302 BOSCH ME7.5
02612081261037368688 1.21.00706A906032NG 0302 BOSCH ME7.5
02612081291037367575 1.21.00806A906032ND 0202 BOSCH ME7.5
02612081301037367576 1.21.01306A906032NE 0202 BOSCH ME7.5
02612081301037366849 1.21.00706A906032NE 0201 BOSCH ME7.5
02612088591037372555 1.21.02106G906032B 0401 BOSCH ME7.5.10

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata On this epron can be set a KEY.