TOYOTA DYNA 3.0L 16V D-4D 80kW/107HP DENSO

Calculateur DENSO 175822-887 · 109 CV (8 kW) · 3000 cc · Diesel sovralimentato

Base de données calculateursTOYOTA › TOYOTA DYNA 3.0L 16V D-4D 80kW/107HP DENSO

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 8 versions firmware

Données véhicule

MarqueTOYOTA
ModèleDYNA
Moteur3.0L 16V D-4D 80kW/107HP DENSO
Puissance d'origine109 CV / 8 kW
Cylindrée3000 cc
CarburantDiesel sovralimentato
Type de véhiculeLCV

Calculateur

FabricantDENSO
Modèle175822-887
Mémoire / EPROMMICRO NEC 76F0040GD - 512 Kbit - 80000

Opérations / options de tuning disponibles:

  • Limiteur de pression turbo pour le diagnostic
  • Limiteur de pression turbo
  • Pression turbo
  • Pression turbo 2
  • Controle van EGR
  • Pression de géométrie variable 1
  • Pression de géométrie variable 2
  • Injection correction 2
  • Temps d'ouverture d'injection lié à la pression inj.
  • Temps d'ouverture d'injection lié à pression inj.2
  • Valeur maximum de injection
  • Valeur maximum de injection 2
  • Valeur maximum de injection pour le APS/BPS
  • Valeur maximum de injection - limp mode
  • Injection correction
  • Injection correction pour le capteur IAT
  • J
  • Limiteur de couple
  • Charge maximale possible du moteur
  • Charge d'air relative maximale du moteur
  • Limiteur de pression specifique injection
  • Pression specifique injection
  • Débit de masse d'air
  • Demande de couple
  • Limite duty cycle géométrie variable

Identifiants firmware (8)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
89663-25102- 1.67.00432510200 DENSO 175822-887
89663-25101- 1.67.00332510100 DENSO 175822-887
89663-25100- 1.67.00432510000 DENSO 175822-887
89663-25111- 1.00.00632511100 DENSO 175822-887
89663-25210- 1.67.00432521000 DENSO 175822-887
89663-25176- 1.67.00232517600 DENSO 275922-022
89663-25321- 1.67.01632532100 DENSO 275922-022
89663-25461- 1.67.00632546100 DENSO 275922-022

Notes calculateur

Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata