ROVER 75 2.0L 16V CDT 85kW/116HP DDE 4.0

Calculateur BOSCH DDE 4.0 · 116 CV (85 kW) · 2000 cc · Diesel sovralimentato

Base de données calculateursROVER › ROVER 75 2.0L 16V CDT 85kW/116HP DDE 4.0

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 16 versions firmware

Données véhicule

MarqueROVER
Modèle75
Moteur2.0L 16V CDT 85kW/116HP DDE 4.0
Puissance d'origine116 CV / 85 kW
Cylindrée2000 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleDDE 4.0
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Limiteur de pression turbo
  • Pression turbo
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de couple
  • Limiteur de fumées
  • Débit de masse d'air
  • Temps d'overboost

Identifiants firmware (16)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
77855411037351065 1.03.0208633 BOSCH DDE 4.0
77855411037351065 1.03.0178637 BOSCH DDE 4.0
77855411037351065 1.03.0008639 BOSCH DDE 4.0
77855411037351065 1.03.0198635 BOSCH DDE 4.0
77855411037351065 1.03.0118633 BOSCH DDE 4.0
77855411037351065 1.03.0128633 BOSCH DDE 4.0
77855411037351065 1.03.0148633 BOSCH DDE 4.0
77880531037351514 1.03.001B136 BOSCH DDE 4.0
77880531037781514 1.03.013A132 BOSCH DDE 4.0
77880531037351514 1.03.002A132 BOSCH DDE 4.0
77880531037351514 1.03.006B134 BOSCH DDE 4.0
77929381037361846 1.03.001D245 BOSCH DDE 4.0
7792938123456789 1.03.008D245 BOSCH DDE 4.0
77929380123456789 1.03.002D245 BOSCH DDE 4.0
77929381037361846 1.03.002D246 BOSCH DDE 4.0
77929380123456789 1.03.000D246 BOSCH DDE 4.0

Notes calculateur

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BT. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Modules additionnels disponibles

→ See all add-on modules on the shop