RENAULT VEL SATIS 2.2L 16V dCi 110kW/148HP EDC15C3

Calculateur BOSCH EDC15C3 · 150 CV (11 kW) · 2200 cc · Diesel sovralimentato

Base de données calculateursRENAULT › RENAULT VEL SATIS 2.2L 16V dCi 110kW/148HP EDC15C3

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 12 versions firmware

Données véhicule

MarqueRENAULT
ModèleVEL SATIS
Moteur2.2L 16V dCi 110kW/148HP EDC15C3
Puissance d'origine150 CV / 11 kW
Cylindrée2200 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleEDC15C3
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Limiteur de pression turbo
  • Pression turbo
  • Controle van EGR
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de couple 2
  • Limiteur de couple
  • Limiteur de fumées
  • Limiteur de pression specifique injection
  • Pression specifique injection
  • Débit de masse d'air
  • Temps d'overboost

Identifiants firmware (12)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02810106371037363204 1.05.0031037366010 BOSCH EDC15C3
02810106371037363204 1.05.0051037374457 BOSCH EDC15C3
02810106371037363204 1.05.0071037363517 BOSCH EDC15C3
02810109921037367107 1.05.0051037370505 BOSCH EDC15C3
02810113251037367179 1.05.0021037374110 BOSCH EDC15C3
02810113251037367179 1.05.0021037374114 BOSCH EDC15C3
02810113251037367179 1.05.0021037367637 BOSCH EDC15C3
02810113251037367179 1.05.0061037368475 BOSCH EDC15C3
02810115711037368957 1.00.0011037368955 BOSCH EDC15C3
02810117251037369187 1.05.0011037374114 BOSCH EDC15C3
02810117251037369187 1.05.0041037374113 BOSCH EDC15C3
02810117251037369187 1.05.0021037375591 BOSCH EDC15C3

Notes calculateur

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius.

Modules additionnels disponibles

→ See all add-on modules on the shop