MV AGUSTA RIVALE 800 12->20 92kW

Calculateur ELDOR NEMO 2.0 · 125 CV (92 kW) · 800 cc · Benzina aspirato

Base de données calculateursMV AGUSTA › MV AGUSTA RIVALE 800 12->20 92kW

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 14 versions firmware

Données véhicule

MarqueMV AGUSTA
ModèleRIVALE 800
Moteur12->20 92kW
Puissance d'origine125 CV / 92 kW
Cylindrée800 cc
CarburantBenzina aspirato
Type de véhiculeMoto

Calculateur

FabricantELDOR
ModèleNEMO 2.0
Mémoire / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Opérations / options de tuning disponibles:

  • Avance correction cylindre 2
  • Avance principale
  • Lambda/AFR en charge partielle
  • Avance optimal
  • Correction avance à l'allumage pour le capteur ECT
  • Calcul de charge du moteur désirée
  • Correction Lambda
  • Correction Lambda 2
  • Limiteur de tours
  • Limiteur de tours 2
  • Lambda demandée
  • Limiteur de vitesse
  • Débit de masse d'air
  • Demande de couple
  • Couple demandeé - MT
  • Demande de couple en map set 2
  • Demande de couple en map set 3
  • Gestion angle papillon

Identifiants firmware (14)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
M3M34R-0509 1.00.0030509RE28 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RA32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RA43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RB32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RB43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RC32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RC43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RE32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RE43 ELDOR NEMO 2.0
M3M34R-0509 1.00.0080509R028 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RG32 ELDOR NEMO 2.0
M3M34R-0516 1.00.0040516RG43 ELDOR NEMO 2.0
M3M34R-0516 1.00.0050516R032 ELDOR NEMO 2.0
M3M34R-0516 1.00.0080516R043 ELDOR NEMO 2.0

Notes techniques véhicule

OBD placé sous la selle

Notes calculateur

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.