MERCEDES TRUCK ACTROS 1853 16L V8 390kW/523HP TEMIC

Calculateur TEMIC TEMIC PLD · 530 CV (39 kW) · 16000 cc · Diesel sovralimentato

Base de données calculateursMERCEDES TRUCK › MERCEDES TRUCK ACTROS 1853 16L V8 390kW/523HP TEMIC

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 15 versions firmware

Données véhicule

MarqueMERCEDES TRUCK
ModèleACTROS
Moteur1853 16L V8 390kW/523HP TEMIC
Puissance d'origine530 CV / 39 kW
Cylindrée16000 cc
CarburantDiesel sovralimentato
Type de véhiculeTir

Calculateur

FabricantTEMIC
ModèleTEMIC PLD
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Débit massique maximal d'air à travers le compresseur
  • Limiteur de pression turbo
  • Protection contre la surchauffe du moteur
  • Protection contre la surchauffe du moteur 2
  • Protection contre la surchauffe du moteur 3
  • Gestion de couple de base pendant le démarrage du moteur
  • Moteur au ralenti pour le capteur ECT
  • Angle d'injection
  • Angle d'injection 2
  • Angle d'injection - correccion
  • Angle de refoulement injection
  • Limiteur de fumées
  • Couple maximale indiqué
  • Profil de couple maximal

Identifiants firmware (15)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
53H 1.54.016 TEMIC TEMIC PLD
V49 1.54.130 TEMIC TEMIC PLD
J51 1.54.013 TEMIC TEMIC PLD
B50 1.54.124 TEMIC TEMIC PLD
53H 1.54.015 TEMIC TEMIC PLD
G51 1.54.126 TEMIC TEMIC PLD
07B 1.54.014 TEMIC TEMIC PLD
23F 1.54.007 TEMIC TEMIC PLD
53G 1.54.120 TEMIC TEMIC PLD
53G 1.54.128 TEMIC TEMIC PLD
W49 1.54.125 TEMIC TEMIC PLD
B50 1.54.129 TEMIC TEMIC PLD
22B 1.00.005 TEMIC TEMIC PLD
E51 1.54.123 TEMIC TEMIC PLD
1.54.010 TEMIC TEMIC PLD

Notes calculateur

Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM TSOP 48 pins 29F200BB. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
This Setting File can be used for serial system NewGenius.