LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

Calculateur BOSCH DDE 4.0 · 177 CV (13 kW) · 2900 cc · Diesel sovralimentato

Base de données calculateursLAND ROVER › LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 6 versions firmware

Données véhicule

MarqueLAND ROVER
ModèleRANGE ROVER (L322)
Moteur2.9L 24V TD6 130kW/174HP DDE 4.0
Puissance d'origine177 CV / 13 kW
Cylindrée2900 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleDDE 4.0
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Limiteur de pression turbo
  • Pression turbo
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de couple
  • Limiteur de fumées
  • Limiteur de vitesse
  • Pression specifique injection
  • Débit de masse d'air
  • Temps d'overboost
  • Temps d'overboost à vitesse 1 et 2
  • Temps d'overboost à 5ième vitesse
  • Temps d'overboost à vitesse 3 et 4

Identifiants firmware (6)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
1.03.015 BOSCH DDE 4.0
77894661037351777 1.03.020C118 BOSCH DDE 4.0
77894661037351935 1.03.009C118 BOSCH DDE 4.0
77913671037361814 1.03.019C226 BOSCH DDE 4.0
77913671037361814 1.03.001C230 BOSCH DDE 4.0
XXXXXXX1037361814 1.03.011C224 BOSCH DDE 4.0

Notes calculateur

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BT. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.

Modules additionnels disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):