CHERY TIGGO 3 2.0L 16V 100kW/134HP ME7.9.7

Calculateur BOSCH ME7.9.7 · 136 CV (1 kW) · 2000 cc · Benzina aspirato

Base de données calculateursCHERY › CHERY TIGGO 3 2.0L 16V 100kW/134HP ME7.9.7

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 1 versions firmware

Données véhicule

MarqueCHERY
ModèleTIGGO 3
Moteur2.0L 16V 100kW/134HP ME7.9.7
Puissance d'origine136 CV / 1 kW
Cylindrée2000 cc
CarburantBenzina aspirato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.9.7
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Correction Lambda
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de avance
  • Limiteur de couple
  • Limiteur de tours
  • Débit de masse d'air

Identifiants firmware (1)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
0261201613 1.42.003 BOSCH ME7.9.7

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!