AUDI TT (8N) 1.8L 20V TURBO 132KW/177HP ME7.5 — Calculateur BOSCH ME7.5

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 32 versions firmware

Obtenez le fichier pour ce véhicule

Achetez le fichier (origine ou reprogrammé)Inscrivez-vous sur mastertuningfile.com et commandez le fichier

Vous êtes un garage ou un tuner ?

Données véhicule

Marque	AUDI
Modèle	TT (8N)
Moteur	1.8L 20V TURBO 132KW/177HP ME7.5
Puissance d'origine	179 CV / 132 kW
Cylindrée	1800 cc
Carburant	Benzina sovralimentato
Type de véhicule	Auto

Calculateur

Fabricant	BOSCH
Modèle	ME7.5
Mémoire / EPROM	29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

Avance à charge partielle
Limiteur de pression turbo pour le diagnostic
Limiteur de pression turbo
Limiteur de pression turbo 2
Limiteur de pression turbo 3
Référence charge pedal / position du papillon
Injection charge partielle
Injection correction
Limiteur de avance
Limiteur de couple
Enrichissement Lambda pour la protection des composants
Limiteur de cliquetis
Limiteur de vitesse
Calcul du débit massique d'air d'accélérateur
P
Controle de la pression turbo max
Référence charge pedal / position du papillon - AT
Débit de masse d'air
Gestion angle papillon

Identifiants firmware (32)

N° Hardware	N° Software (chip)	Version	Logiciel de mise à jour	Calculateur
0261204898	1037350293	1.21.042	8N0906018A 0010	BOSCH ME7.5
0261204898	1037350067	1.21.017	8N0906018A 0009	BOSCH ME7.5
0261204962	1037350064	1.21.034	8N0906018B 0003	BOSCH ME7.5
0261204962	1037350294	1.21.028	8N0906018B 0004	BOSCH ME7.5
0261206439	1037354510	1.21.029	8N0906018Q 0004	BOSCH ME7.5
0261206439	1037352763	1.21.015	8N0906018Q 0003	BOSCH ME7.5
0261206440	1037354509	1.21.043	8L0906018J 0005	BOSCH ME7.5
0261206440	1037352762	1.21.010	8L0906018J 0004	BOSCH ME7.5
0261206441	1037354080	1.21.007	8N0906018M 0006	BOSCH ME7.5
0261206582	1037354079	1.00.008	8N0906018S 0007	BOSCH ME7.5
0261206582	1037352751	1.00.007	8N0906018S 0006	BOSCH ME7.5
0261206582	1037352341	1.00.017	8N0906018S 0004	BOSCH ME7.5
0261206582	1037352144	1.00.011	8N0906018S 0003	BOSCH ME7.5
0261206611	1037360276	1.21.004	8N0906018L 0003	BOSCH ME7.5
0261206790	1037354029	1.21.027	8L0906018Q 0001	BOSCH ME7.5
0261206790	1037360287	1.21.010	8L0906018Q 0002	BOSCH ME7.5
0261207027	1037354503	1.21.048	8N0906018AB 0002	BOSCH ME7.5
0261207028	1037354504	1.21.028	8N0906018AC 0002	BOSCH ME7.5
0261207212	1037354897	1.21.011	8L0906018R 0002	BOSCH ME7.5
0261207214	1037360228	1.21.011	8N0906018AH 0003	BOSCH ME7.5
0261207416	1037360843	1.21.023	8N0906018AQ 0001	BOSCH ME7.5
0261207416	1037363478	1.42.029	8N0906018AQ 0002	BOSCH ME7.5
0261207417	1037360844	1.21.011	8N0906018AM 0001	BOSCH ME7.5
0261207419	1037362515	1.21.010	8N0906018AL 0004	BOSCH ME7.5
0261207419	1037363356	1.21.002	8N0906018AL 0007	BOSCH ME7.5
0261207419	1037362936	1.21.016	8N0906018AL 0006	BOSCH ME7.5
0261207775	1037366366	1.42.018	8N0906018BC 0002	BOSCH ME7.5
0261207776	1037366835	1.42.015	8N0906018BD 0003	BOSCH ME7.5
0261207777	1037366365	1.42.006	8N0906018BE 0002	BOSCH ME7.5
0261208005	1037369398	1.42.016	8N0906018BR 0002	BOSCH ME7.5
0261208005	1037363675	1.42.016	8N0906018BR 0001	BOSCH ME7.5
0261208271	1037367513	1.42.022	8N0906018CK 0001	BOSCH ME7.5

Notes techniques véhicule

OBD située sous la colonne de direction, au dessus des pédales. Visible ou masquée par un couvercle plastique.

Notes calculateur

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Original EPROM PSOP 44 pins 29F400BB. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.