AUDI A6 (C4/4A) 1.8L 16V TURBO 110KW/150HP ME7.5

Calculateur BOSCH ME7.5 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

Base de données calculateursAUDI › AUDI A6 (C4/4A) 1.8L 16V TURBO 110KW/150HP ME7.5

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 11 versions firmware

Données véhicule

MarqueAUDI
ModèleA6 (C4/4A)
Moteur1.8L 16V TURBO 110KW/150HP ME7.5
Puissance d'origine150 CV / 11 kW
Cylindrée1800 cc
CarburantBenzina sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.5
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Limiteur de pression turbo pour le diagnostic
  • Limiteur de pression turbo
  • Limiteur de pression turbo 2
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Limiteur de avance
  • Limiteur de couple
  • Enrichissement Lambda pour la protection des composants
  • Limiteur de cliquetis
  • P
  • Controle de la pression turbo max
  • Référence charge pedal / position du papillon - AT
  • Débit de masse d'air

Identifiants firmware (11)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612048971037350204 1.21.0144B0906018K 0005 BOSCH ME7.5
02612060421037350228 1.21.0334B0906018 0004 BOSCH ME7.5
02612063201037350703 1.21.0184B0906018L 0004 BOSCH ME7.5
02612064491037352728 1.21.0184B0906018AA 0006 BOSCH ME7.5
02612064501037352711 1.21.0164B0906018AL 0006 BOSCH ME7.5
02612065241037352053 1.21.0164B0906018AR 0001 BOSCH ME7.5
02612065251037352054 1.21.0104B0906018BF 0002 BOSCH ME7.5
02612065251037352710 1.21.0104B0906018BF 0006 BOSCH ME7.5
02612076351037362357 1.21.0084B0906018DB 0001 BOSCH ME7.5
02612076361037362358 1.21.0124B0906018DC 0001 BOSCH ME7.5
02612076631037363030 1.42.0144B0906018CS 0002 BOSCH ME7.5

Notes calculateur

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.