AUDI A4 (B6/8E/8H) 2.4L V6 24V 121KW/162HP ME7.1/5

Calculateur BOSCH ME7.1/5 · 165 CV (121 kW) · 2400 cc · Benzina aspirato

Base de données calculateursAUDI › AUDI A4 (B6/8E/8H) 2.4L V6 24V 121KW/162HP ME7.1/5

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 14 versions firmware

Données véhicule

MarqueAUDI
ModèleA4 (B6/8E/8H)
Moteur2.4L V6 24V 121KW/162HP ME7.1/5
Puissance d'origine165 CV / 121 kW
Cylindrée2400 cc
CarburantBenzina aspirato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME7.1/5
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Avance à charge partielle
  • Référence charge pedal / position du papillon
  • Injection charge partielle
  • Injection à pleine charge
  • Limiteur de avance
  • Limiteur de couple
  • Référence charge pedal / position du papillon - AT
  • Débit de masse d'air

Identifiants firmware (14)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02612048931037354748 1.21.0063B00907552 0002 BOSCH ME7.1/5
02612061221037350079 1.21.0123B0907552J 0001 BOSCH ME7.1/5
02612063971037350283 1.21.0123B0907552L 0002 BOSCH ME7.1/5
02612063971037354089 1.21.0073B0907552L 0003 BOSCH ME7.1/5
02612074941037363419 1.21.0108E0909552 0004 BOSCH ME7.1/5
02612074951037363408 1.21.0078E0909552A 0004 BOSCH ME7.1/5
02612074971037367707 1.21.0068E0909552C 0050 BOSCH ME7.1/5
02612075001037362353 1.21.0103B0907552BJ 0001 BOSCH ME7.1/5
02612080381037366397 1.21.0078E0909552M 0004 BOSCH ME7.1/5
02612080381037366138 1.21.0198E0909552M 0003 BOSCH ME7.1/5
02612080391037366137 1.21.0088E0909552N 0003 BOSCH ME7.1/5
02612080391037366398 1.21.0078E0909552N 0004 BOSCH ME7.1/5
02612080391037367683 1.21.0048E0909552N 0050 BOSCH ME7.1/5
02612083711037367272 1.21.0088B0909552R 0010 BOSCH ME7.1/5

Notes techniques véhicule

OBD située sous la colonne de direction, au dessus des pédales. Visible ou masquée par un couvercle plastique.

Notes calculateur

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.