TOYOTA HILUX/REVO/VIGO (AN10-AN20-AN30) 3.0L 16V L4 D-4D 120kW/161HP DENSO

ECU DENSO 175822-666 · 163 CV (12 kW) · 3000 cc · Diesel sovralimentato

ECU DatabaseTOYOTA › TOYOTA HILUX/REVO/VIGO (AN10-AN20-AN30) 3.0L 16V L4 D-4D 120kW/161HP DENSO

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 33 firmware versions

Vehicle data

BrandTOYOTA
ModelHILUX/REVO/VIGO (AN10-AN20-AN30)
Engine3.0L 16V L4 D-4D 120kW/161HP DENSO
Stock power163 CV / 12 kW
Displacement3000 cc
FuelDiesel sovralimentato
Vehicle typeLCV

ECU

ManufacturerDENSO
Model175822-666
Memory / EPROMMICRO NEC 76F0040GD - 512 Kbit - 80000

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • EGR valve control
  • Variable boost pressure 1
  • Variable boost pressure 2
  • Injection correction 2
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Max injection limit
  • Max injection limit 2
  • Max injection limit for APS/BPS sensor
  • Max injection limit - limp mode
  • Injection correction
  • Injection correction for IAT sensor
  • J
  • Torque limiter
  • Speed limiter
  • Maximum possible engine charge
  • Maximum relative engine air charge
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow
  • Driver torque request
  • Variable geometry duty cycle limit

Firmware identifiers (33)

Hardware No.Software No. (chip)VersionUpdate softwareECU
89663-0K143- 1.67.01030K14300 DENSO 175822-666
89663-0K202- 1.67.00230K20200 DENSO 175822-666
89663-0K152- 1.67.01430K15200 DENSO 175822-666
89663-0K170- 1.67.01130K17000 DENSO 175822-666
1.00.022 DENSO 175822-666
89663-0K161- 1.67.00430K16100 DENSO 175822-666
89663-0K182- 1.67.01030K18200 DENSO 175822-666
89663-0K213- 1.67.00730K21300 DENSO 175822-666
89663-0K112- 1.67.01130K11200 DENSO 175822-666
89663-0K162- 1.67.00730K16200 DENSO 175822-666
89663-0K192- 1.67.00930K19200 DENSO 175822-666
89663-0K151- 1.67.00530K15100 DENSO 175822-666
89663-0K183- 1.67.01430K18300 DENSO 175822-666
89663-0K173- 1.67.02730K17300 DENSO 175822-666
89663-0K153- 1.67.00530K15300 DENSO 175822-666
89663-0K193- 1.67.00530K19300 DENSO 175822-666
89663-0K142- 1.67.01030K14200 DENSO 175822-666
89663-0K172- 1.67.01030K17200 DENSO 175822-666
89663-0K150- 1.67.01130K15000 DENSO 175822-666
89663-0K223- 1.67.01030K22300 DENSO 175822-666
89663-0K141- 1.67.00430K14100 DENSO 175822-666
89663-0KP30- 1.67.00730KP3000 DENSO 175822-887
89663-0KC40- 1.67.00630KC4000 DENSO 175822-887
89663-0KP40- 1.67.00530KP4000 DENSO 175822-887
89663-0KN53- 1.51.02930KN5300 DENSO 175822-887
89663-0KN70- 1.51.00730KN7000 DENSO 175822-887
89663-0KN71- 1.51.00630KN7100 DENSO 175822-887
89663-0KN73- 1.51.00330KN7300 DENSO 175822-887
89663-0KN54- 1.51.01030KN5400 DENSO 175822-887
89663-0KN81- 1.51.00430KN8100 DENSO 175822-887
89663-0KN72- 1.51.00930KN7200 DENSO 175822-887
89663-0KP31- 1.67.00630KP3100 DENSO 175822-887
89663-0KP33- 1.67.00430KP3300 DENSO 175822-887

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F040AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Add-on modules available

→ See all add-on modules on the shop