TOYOTA AURIS (E150) 2.2L 16V D-CAT 130kW/177HP DENSO

ECU DENSO 175822-773 · 177 CV (13 kW) · 2200 cc · Diesel sovralimentato

ECU DatabaseTOYOTA › TOYOTA AURIS (E150) 2.2L 16V D-CAT 130kW/177HP DENSO

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 5 firmware versions

Vehicle data

BrandTOYOTA
ModelAURIS (E150)
Engine2.2L 16V D-CAT 130kW/177HP DENSO
Stock power177 CV / 13 kW
Displacement2200 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerDENSO
Model175822-773
Memory / EPROMMICRO NEC 76F0038AGD - 6144 Kbit - C0000

Available tuning operations / options:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • EGR valve control
  • EGR valve control 2
  • Variable boost pressure 1
  • Injection correction 2
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Max injection limit
  • Max injection limit for APS/BPS sensor
  • Max injection limit - limp mode
  • Injection correction
  • Injection correction for IAT sensor
  • J
  • Injection 2
  • Injection 3
  • Injection 4
  • Maximum possible engine charge
  • Main injection
  • Specific injection pressure
  • Air mass flow
  • Driver torque request
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 3

Firmware identifiers (5)

Hardware No.Software No. (chip)VersionUpdate softwareECU
89663-02435- 1.67.00830243500 DENSO 175822-773
89663-02434- 1.67.01030243400 DENSO 175822-773
89663-02U80- 1.67.007302U8000 DENSO 175822-773
89663-02431- 1.67.01030243100 DENSO 175822-773
89663-02433- 1.67.00630243300 DENSO 175822-773

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Add-on modules available

→ See all add-on modules on the shop