PEUGEOT TRAVELLER 2.0L 16V BlueHDI 110kW/147HP DCM6.2A
ECU DELPHI DCM6.2A · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato
ECU Database ›
PEUGEOT › PEUGEOT TRAVELLER 2.0L 16V BlueHDI 110kW/147HP DCM6.2A
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
6 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | PEUGEOT |
| Model | TRAVELLER |
| Engine | 2.0L 16V BlueHDI 110kW/147HP DCM6.2A |
| Stock power | 150 CV / 11 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | LCV |
ECU
| Manufacturer | DELPHI |
| Model | DCM6.2A |
| Memory / EPROM | MICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000 |
Available tuning operations / options:
- Boost pressure limiter 2
- Boost pressure limiter 3
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure limit control
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Load / throttle position reference
- Load / throttle position reference 2
- Load / throttle position reference 3
- Max exhaust gas temperature curve for full load
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection opening time related to inj. pressure
- J
- Injection 2
- Injection 3
- Injection 4
- Injection 5
- Torque limiter
- Torque limiter for smoke limitation
- Maximum indicated torque
- Maximum indicated virtual torque
- Maximum engine power
- Throttle air mass flow calculation
- Max torque profile
- Max torque profile - AT
- Max torque profile for diagnostic
- Max torque profile - MT
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 5
- Specific injection pressure 6
- Driver torque request
- Driver torque request for medium speed
- Driver torque request for low speed
- Driver torque request from MAP sensor
- Driver torque request at the start
- Driver torque request for reverse gear
- Torque limiter for gear-shift too long
- Torque limiter for selected gear
- Torque limiter for the APS/BPS
- Torque limit table for IAT sensor
- Torque limiter for EFT sensor
- Torque limit table for EOT sensor
- Torque limit table for the rail pressure demand
- Torque limit table for ECT sensor
- Take-off torque law from MAP sensor
Firmware identifiers (6)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| 9809447980 | 9809447980 | 1.00.003 | 9695353180 | DELPHI DCM6.2A |
| 9809447980 | 9809447980 | 1.84.007 | 9693333380 | DELPHI DCM6.2A |
| 9809447980 | 9809447980 | 1.00.008 | 9695353780 | DELPHI DCM6.2A |
| 9809447980 | 9809447980 | 1.00.009 | 9693143180 | DELPHI DCM6.2A |
| 9809447980 | 9809447980 | 1.00.005 | 9692490880 | DELPHI DCM6.2A |
| 9809447980 | 9809447980 | 1.84.003 | 9694036780 | DELPHI DCM6.2A |
ECU notes
Microprocessor BGA FREESCALE MPC5674F This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
