MV AGUSTA F4 1000 RR 12->15 148kW

ECU ELDOR NEMO 2.0 · 201 CV (148 kW) · 1000 cc · Benzina aspirato

ECU DatabaseMV AGUSTA › MV AGUSTA F4 1000 RR 12->15 148kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 15 firmware versions

Vehicle data

BrandMV AGUSTA
ModelF4 1000 RR
Engine12->15 148kW
Stock power201 CV / 148 kW
Displacement1000 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerELDOR
ModelNEMO 2.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Advance correction cylinder 2
  • Base timing
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Lambda correction
  • Lambda Correction 2
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Speed limiter
  • Air mass flow
  • Driver torque request
  • Driver torque request - MT
  • Requested torque map set 2
  • Requested torque map set 3
  • Throttle angle management

Firmware identifiers (15)

Hardware No.Software No. (chip)VersionUpdate softwareECU
M3M44R-0516 1.00.0040516FY39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0070516FD39 ELDOR NEMO 2.0
M3M44R-0515 1.00.0030515F038 ELDOR NEMO 2.0
M3M44R-0515 1.00.0030515FB38 ELDOR NEMO 2.0
M3M44R-0509 1.00.0040509FL34 ELDOR NEMO 2.0
M3M44R-0515 1.00.0110515FD38 ELDOR NEMO 2.0
M3M44R-0509 1.00.0070509FF35 ELDOR NEMO 2.0
M3A35R-0904 1.00.0060904DY53 ELDOR NEMO 2.0
M3M44R-0509 1.00.0080509FD34 ELDOR NEMO 2.0
M3M44R-0516 1.00.0100516FF39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FE39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FG39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FL39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FU39 ELDOR NEMO 2.0
M3M44R-0516 1.00.0040516FX39 ELDOR NEMO 2.0

Vehicle technical notes

OBD placed under the saddle

ECU notes

Microprocessor SPC563M64 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.