VOLVO V70 Mk2 2.4L 20V TURBO 191kW/256HP ME7.0

Steuergerät BOSCH ME7.0 · 260 CV (191 kW) · 2400 cc · Benzina sovralimentato

Steuergeräte-DatenbankVOLVO › VOLVO V70 Mk2 2.4L 20V TURBO 191kW/256HP ME7.0

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 13 Firmware-Versionen

Fahrzeugdaten

MarkeVOLVO
ModellV70 Mk2
Motor2.4L 20V TURBO 191kW/256HP ME7.0
Serienleistung260 CV / 191 kW
Hubraum2400 cc
KraftstoffBenzina sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.0
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Ladedruckbegrenzer für Diagnose
  • Ladedruckbegrenzer
  • Ladedruckbegrenzer 2
  • Last Position Drosselklappe
  • Einspritzung Teillast
  • Einspritzung bei Volllast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Ladeddruck Kontrolle
  • Maximale Ladedruck Verwaltung
  • Last Position Drosselklappe für Automatische Getriebe
  • Luftmassenfluss

Firmware-Kennungen (13)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612045591037359462 1.46.0121xEIMH.a2l BOSCH ME7.0
02612045591037359462 1.46.00810epfp.a2l BOSCH ME7.0
02612045591037359462 1.46.0182xFEMH.a2l BOSCH ME7.0
02612045591037359462 1.46.00520FMFP.a2l BOSCH ME7.0
02612045591037359462 1.46.00420FWHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.01120KTHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.02010j0mgde.a2l BOSCH ME7.0
02612045591037359462 1.46.01420FMFP.a2l BOSCH ME7.0
02612045591037359462 1.46.01150WRHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.00750GMHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.01520FMFP.a2l BOSCH ME7.0
02612045591037359462 1.46.01120FMFP.a2l BOSCH ME7.0
02612045591037359462 1.46.01220NGHJ.a2l BOSCH ME7.0

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata