VOLVO S80 Mk1 2.9L 144kW/196HP ME7.0

Steuergerät BOSCH ME7.0 · 196 CV (144 kW) · 2900 cc · Benzina aspirato

Steuergeräte-DatenbankVOLVO › VOLVO S80 Mk1 2.9L 144kW/196HP ME7.0

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 2 Firmware-Versionen

Fahrzeugdaten

MarkeVOLVO
ModellS80 Mk1
Motor2.9L 144kW/196HP ME7.0
Serienleistung196 CV / 144 kW
Hubraum2900 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.0
Speicher / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Last Position Drosselklappe
  • Einspritzung Teillast
  • Einspritzung bei Volllast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Last Position Drosselklappe für Automatische Getriebe
  • Luftmassenfluss

Firmware-Kennungen (2)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612045591037359462 1.46.0263010mgde.a2l BOSCH ME7.0
02612045591037359462 1.46.01230GPHJ.a2l BOSCH ME7.0

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!