VOLVO TRUCK FM MK II 340 12L 250kW/335HP LUCAS

Steuergerät LUCAS PLCC 28HC256 · 340 CV (25 kW) · 12000 cc · Diesel sovralimentato

Steuergeräte-DatenbankVOLVO TRUCK › VOLVO TRUCK FM MK II 340 12L 250kW/335HP LUCAS

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 13 Firmware-Versionen

Fahrzeugdaten

MarkeVOLVO TRUCK
ModellFM MK II
Motor340 12L 250kW/335HP LUCAS
Serienleistung340 CV / 25 kW
Hubraum12000 cc
KraftstoffDiesel sovralimentato
FahrzeugtypTir

Steuergerät

HerstellerLUCAS
ModellPLCC 28HC256
Speicher / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Verfügbare Tuning-Optionen:

  • Einspritzung im Leerlauf
  • Einspritzung Teillast
  • Einspritzung bei Volllast
  • Drehmomentbegrenzer 2
  • Drehmomentbegrenzer
  • Rauchbegrenzer im Leerlauf
  • Rauchbegrenzer bei Tellast
  • Rauchbegrenzer bei Volllast

Firmware-Kennungen (13)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
03161952XXXX3218 1.55.008 LUCAS PLCC 28HC256
03161962XXXX3070 1.55.001 LUCAS PLCC 28HC256
03161962XXXX9531 1.55.005 LUCAS PLCC 28HC256
03161962XXXX6997 1.55.004 LUCAS PLCC 28HC256
03161962XXXX3296 1.55.110 LUCAS PLCC 28HC256
03161962XXXX2068 1.55.006 LUCAS PLCC 28HC256
03161962XXXX9624 1.55.107 LUCAS PLCC 28HC256
08170700XXXX3083 1.55.004 LUCAS PLCC 28HC256
20412506XXXX3237 1.55.007 LUCAS PLCC 28HC256
20412506XXXX3218 1.55.005 LUCAS PLCC 28HC256
20577131XXXX4922 1.55.004 LUCAS PLCC 28HC256
20577131XXXX0979 1.55.005 LUCAS PLCC 28HC256
20582958XXXX3237 1.55.003 LUCAS PLCC 28HC256

Steuergerät-Hinweise

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.
Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius. On this epron can be set a KEY.
Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY.