VOLKSWAGEN SHARAN 1 2.8L V6 24V 150kW/201HP ME7.1/7.5

Steuergerät BOSCH ME7.1.1 · 204 CV (15 kW) · 2800 cc · Benzina aspirato

Steuergeräte-DatenbankVOLKSWAGEN › VOLKSWAGEN SHARAN 1 2.8L V6 24V 150kW/201HP ME7.1/7.5

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 9 Firmware-Versionen

Fahrzeugdaten

MarkeVOLKSWAGEN
ModellSHARAN 1
Motor2.8L V6 24V 150kW/201HP ME7.1/7.5
Serienleistung204 CV / 15 kW
Hubraum2800 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.1.1
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Zündung im Leearlauf
  • Optimaler Zündwinkel
  • Zundungkorrektur Klopfsensor
  • Last Position Drosselklappe
  • Wert der Basislambda
  • Drehmomentbegrenzer
  • Lambda-Anreicherung für Bauteileschutz
  • Lambda-Bezug Wert
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Geschwindigkeitsbegrenzung
  • Krümmerabsolutdruck Verzögerung
  • Neben Luftmengenmesser
  • Luftmassenfluss
  • Fahrerwunsch drehmoment

Firmware-Kennungen (9)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612084371037368650 1.21.004022906032EJ 5525 BOSCH ME7.1.1
02612068161037360628 1.21.024022906032G 0011 BOSCH ME7.1/3
02612073821037362920 1.21.004022906032AQ 0005 BOSCH ME7.1/3
02612073841037362915 1.21.005022906032AR 0005 BOSCH ME7.1/3
02612073861037372942 1.21.014022906032AS 0005 BOSCH ME7.1/3
02612073861037362338 1.21.004022906032AS 0004 BOSCH ME7.1/3
02612080101037367570 1.21.005022906032CT 0003 BOSCH ME7.1/3
02612084361037368649 1.21.004022906032EH 5523 BOSCH ME7.1/3
02612066001037352823 1.21.01406A906032AK 3567 BOSCH ME7.5

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata