VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 125kW/168HP ME7.1.1

Steuergerät BOSCH ME7.1.1 · 170 CV (125 kW) · 2500 cc · Benzina sovralimentato

Steuergeräte-DatenbankVOLKSWAGEN › VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 125kW/168HP ME7.1.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 3 Firmware-Versionen

Fahrzeugdaten

MarkeVOLKSWAGEN
ModellJETTA 5 (A5)
Motor2.5L 20V 125kW/168HP ME7.1.1
Serienleistung170 CV / 125 kW
Hubraum2500 cc
KraftstoffBenzina sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.1.1
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Optimaler Zündwinkel
  • Berechnung Motor Sollfüllung
  • Kennfeld Lambda-Motor-Beschreibung im Nachstart
  • Abgastemperatur
  • Einspritzung Teillast
  • Drehzahl-/Geschwindigkeitsbegrenzer
  • Lambda-Anreicherung für Bauteileschutz
  • Drehzahlbegrenzer 2
  • Drehzahlbegrenzer 3
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Geschwindigkeitsbegrenzung
  • Berechnung Massenstrom über Drosselklappe
  • Krümmerabsolutdruck Verzögerung
  • Neben Luftmengenmesser
  • Optimales Motormoment
  • Fahrerwunsch drehmoment
  • Drosselklappen-Sollwinkel

Firmware-Kennungen (3)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612011271037393225 1.84.00407K906032Q 9934 BOSCH ME7.1.1
02612015041037383980 1.42.00307K906032BC 0603 BOSCH ME7.1.1
02612016791037390701 1.84.00307K906032BM 0711 BOSCH ME7.1.1

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata