VOLKSWAGEN CADDY MK3 (2K) 2.0L 8V ECOFUEL 80kW/107HP ME7.1.1

Steuergerät BOSCH ME7.1.1 · 109 CV (8 kW) · 2000 cc · Metano

Steuergeräte-DatenbankVOLKSWAGEN › VOLKSWAGEN CADDY MK3 (2K) 2.0L 8V ECOFUEL 80kW/107HP ME7.1.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) ✓ Zusatzmodul verfügbar 11 Firmware-Versionen

Fahrzeugdaten

MarkeVOLKSWAGEN
ModellCADDY MK3 (2K)
Motor2.0L 8V ECOFUEL 80kW/107HP ME7.1.1
Serienleistung109 CV / 8 kW
Hubraum2000 cc
KraftstoffMetano
FahrzeugtypLCV

Steuergerät

HerstellerBOSCH
ModellME7.1.1
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Last Position Drosselklappe
  • Einspritzung Teillast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Lambda-Anreicherung für Bauteileschutz
  • Klopfsensor Begrenzer
  • Geschwindigkeitsbegrenzung
  • Geschwindigkeitsbegrenzung 2
  • Luftmassenfluss

Firmware-Kennungen (11)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
0261S056661037503783 1.84.00306G906022H 5183 BOSCH ME7.1.1
0261S056661037515863 1.84.00406G906022H 9003 BOSCH ME7.1.1
0261S056671037503686 1.84.00606G906022J 5182 BOSCH ME7.1.1
0261S059541037515850 1.84.00306G997022A 8973 BOSCH ME7.1.1
0261S061831037515846 1.84.00406G906022R 8976 BOSCH ME7.1.1
0261S061831037527763 1.84.01006G906022R 9970 BOSCH ME7.1.1
0261S061841037515844 1.84.00606G906022S 8977 BOSCH ME7.1.1
0261S061841037512103 1.84.01306G906022S 7684 BOSCH ME7.1.1
0261S089891037534219 1.84.00306G906022T 6012 BOSCH ME7.1.1
0261S089891037534219 1.84.00706G906022T 4220 BOSCH ME7.1.1
0261S089901037534220 1.84.00506G906022AA 6013 BOSCH ME7.1.1

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Zusatzmodule verfügbar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop