SKODA SUPERB (B5) 2.8L VR6 193HP ME7.1/3

Steuergerät BOSCH ME7.1/3 · 196 CV (144 kW) · 2800 cc · Benzina aspirato

Steuergeräte-DatenbankSKODA › SKODA SUPERB (B5) 2.8L VR6 193HP ME7.1/3

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 1 Firmware-Versionen

Fahrzeugdaten

MarkeSKODA
ModellSUPERB (B5)
Motor2.8L VR6 193HP ME7.1/3
Serienleistung196 CV / 144 kW
Hubraum2800 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.1/3
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Last Position Drosselklappe
  • Einspritzung Teillast
  • Einspritzung bei Volllast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Luftmassenfluss

Firmware-Kennungen (1)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612085471037369310 1.21.0073B0907551DD 0010 BOSCH ME7.1/3

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.