PORSCHE BOXSTER (987) 3.4L RS60 223kW/303HP ME7.8.1

Steuergerät BOSCH ME7.8.1 · 303 CV (223 kW) · 3400 cc · Benzina aspirato

Steuergeräte-DatenbankPORSCHE › PORSCHE BOXSTER (987) 3.4L RS60 223kW/303HP ME7.8.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) ✓ Zusatzmodul verfügbar 3 Firmware-Versionen

Fahrzeugdaten

MarkePORSCHE
ModellBOXSTER (987)
Motor3.4L RS60 223kW/303HP ME7.8.1
Serienleistung303 CV / 223 kW
Hubraum3400 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.8.1
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Minimale zündung erlaubt
  • Optimaler Zündwinkel
  • Berechnung Motor Sollfüllung
  • Kennfeld Lambda-Motor-Beschreibung im Nachstart
  • Abgastemperatur
  • Korrekturfaktor Kraftstoffversorgungssystem
  • Korrekturfaktor Kraftstoffversorgungssystem 2
  • Hohe Luftmassgrenze HFM/HLM
  • Minimalluftmassengrenze HFM/HLM
  • Lambda-Anreicherung für Bauteileschutz
  • Drehmoment begrenzer vs Abgas temperatur
  • Lambda Effizienz
  • Drehzahlbegrenzer
  • Drehzahlbegrenzung im Parkstellung
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • MAF-sensors kalibrierung
  • Angegebener Maximaldrehmoment
  • Angegebener Maximaldrehmoment 2
  • Maximum ignition delay allowed for knock limiter intervention
  • Maximal mögliche Motorladung
  • Berechnung Massenstrom über Drosselklappe
  • Minimum engine air charge value
  • Number of injections considered for knock limitation
  • Optimales Motormoment
  • Offset-Toleranz in Abhängigkeit vom zulässigen Moment
  • Zulässiges Moment aus der Pedalstellung in der Funktion überwach
  • Zulässiges Moment aus der Pedalstellung in der Funktion überwach - sport/race modus
  • Zulässiges Moment aus der Pedalstellung in der Funktion überwach - sport/race modus 2
  • Gaspedal Fahrerwunsch
  • Fahrerwunsch drehmoment
  • Fahrerwunsch Drehmoment im Rückwärtsgang
  • Fahrerwunsch drehmoment im modus Sport
  • Maximale Schwelle zur Erkennung von Motor-Klopfen - bank 1
  • Maximale Schwelle zur Erkennung von Motor-Klopfen - bank 2
  • Drosselklappen-Sollwinkel
  • Pulsationkennfeld Variables SaugRohr

Firmware-Kennungen (3)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612079871037379149 1.27.0060041900007605D08 BOSCH ME7.8.1
02612079871037379149 1.27.0030041900007605D18 BOSCH ME7.8.1
02612083001037379150 1.27.00400419100A8615D0R BOSCH ME7.8.1

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

Zusatzmodule verfügbar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop