MERCEDES SLK CLASS R171 SLK55 AMG 5.5L V8 265kW/355HP ME2.8

Steuergerät BOSCH ME2.8 · 360 CV (265 kW) · 5500 cc · Benzina aspirato

Steuergeräte-DatenbankMERCEDES › MERCEDES SLK CLASS R171 SLK55 AMG 5.5L V8 265kW/355HP ME2.8

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 2 Firmware-Versionen

Fahrzeugdaten

MarkeMERCEDES
ModellSLK CLASS R171
MotorSLK55 AMG 5.5L V8 265kW/355HP ME2.8
Serienleistung360 CV / 265 kW
Hubraum5500 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME2.8
Speicher / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Beschleunigung
  • Lambda/AFR bei Vollast
  • Lambda/AFR bei Teillast
  • Zündung bei Teillast
  • Zündungskorrektur
  • Einspritzung Teillast
  • Einspritzungskorrektur
  • Drehzahlbegrenzer
  • Geschwindigkeitsbegrenzung

Firmware-Kennungen (2)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
11315334911037393966 1.00.004 BOSCH ME2.8
11315336911037393169 1.16.027 BOSCH ME2.8

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F400BB. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY. This Setting File is enabled for serial programming system : Genius or New Genius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.