MASERATI COUPE' 3.2L V8 32V BITURBO GT 370HP IAW4EM

Steuergerät MARELLI 4EM · 370 CV (272 kW) · 3200 cc · Benzina sovralimentato

Steuergeräte-DatenbankMASERATI › MASERATI COUPE' 3.2L V8 32V BITURBO GT 370HP IAW4EM

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 7 Firmware-Versionen

Fahrzeugdaten

MarkeMASERATI
ModellCOUPE'
Motor3.2L V8 32V BITURBO GT 370HP IAW4EM
Serienleistung370 CV / 272 kW
Hubraum3200 cc
KraftstoffBenzina sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerMARELLI
Modell4EM
Speicher / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Zündungskorrektur
  • Einspritzung Teillast
  • Einspritzungskorrektur
  • Drehzahlbegrenzer

Firmware-Kennungen (7)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
1.00.010 MARELLI 4EM
1.00.006 MARELLI 4EM
ME200M31 1.00.009 MARELLI 4EM
ME200M31 1.00.004 MARELLI 4EM
1.00.005 MARELLI 4EM
1.00.007 MARELLI 4EM
4EM.C1ME200M60 1.00.003 MARELLI 4EM

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.
Original EPROM PSOP 44 pins 29F400. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.
Original EPROM PSOP 44 pins 29F400. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This EPROM manages the boost pressure.
Original EPROM PSOP 44 pins 29F400. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Eprom on the RIGTH side (DX) (if you have the ECU with the connector on the TOP); this Menage Injection,VANOS controls and RPM limiter. DO NOT use the protection board and replace the EPROM with ONE of the same type.