LOTUS ELISE S3 CR 1.6L 16V 104kW/140HP EFI T6E

Steuergerät EFI T6E · 142 CV (104 kW) · 1600 cc · Benzina aspirato

Steuergeräte-DatenbankLOTUS › LOTUS ELISE S3 CR 1.6L 16V 104kW/140HP EFI T6E

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) ✓ Zusatzmodul verfügbar 6 Firmware-Versionen

Fahrzeugdaten

MarkeLOTUS
ModellELISE S3
MotorCR 1.6L 16V 104kW/140HP EFI T6E
Serienleistung142 CV / 104 kW
Hubraum1600 cc
KraftstoffBenzina aspirato
FahrzeugtypAuto

Steuergerät

HerstellerEFI
ModellT6E
Speicher / EPROMMICRO BGA MOTOROLA FRESCALE con FLASH interna 8192 Kbit - 0x100000

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Nockenwelle maximale ventilhübe
  • Lambda-Korrektur
  • Lambda-Korrektur 2
  • Haupteinspritzung
  • Fan Aktivierungsschwellwert stage 1
  • Fan Aktivierungsschwellwert stage 2
  • Fan Aktivierungsschwellwert mit motor ausgeschaltet
  • Einlass-VANOS
  • Volumetrischen Wirkungsgrad
  • Auslass-VANOS

Firmware-Kennungen (6)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
B132E0008FH120E0104 1.00.015 EFI T6E
B132E0008FB120E0196 1.00.011 EFI T6E
B132E0008FA120E0196 1.00.003 EFI T6E
B132E0008FE120E0104 1.00.017 EFI T6E
B132E0008FF120E0104 1.00.029 EFI T6E
B132E0008FJ120E0104 1.00.012 EFI T6E

Steuergerät-Hinweise

Microprocessor FMPC 5534 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata Warning! to properly exclude the lambda probe 2, after running the patch LAM2, you must disconnect the connector of lambda probe 2 after the cat.
Microprocessor FMPC 5534 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Zusatzmodule verfügbar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop