AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

Steuergerät BOSCH ME7.1/5 · 250 CV (184 kW) · 2700 cc · Benzina sovralimentato

Steuergeräte-DatenbankAUDI › AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 10 Firmware-Versionen

Fahrzeugdaten

MarkeAUDI
ModellALLROAD A4/A6
Motor2.7L BITURBO 184kW/247HP ME7.1
Serienleistung250 CV / 184 kW
Hubraum2700 cc
KraftstoffBenzina sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.1/5
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Zündung bei Teillast
  • Ladedruckbegrenzer für Diagnose
  • Ladedruckbegrenzer
  • Ladedruckbegrenzer 2
  • Last Position Drosselklappe
  • Einspritzung Teillast
  • Einspritzung bei Volllast
  • Zündungsbegrenzer
  • Drehmomentbegrenzer
  • Ladeddruck Kontrolle
  • Maximale Ladedruck Verwaltung
  • Last Position Drosselklappe für Automatische Getriebe
  • Luftmassenfluss

Firmware-Kennungen (10)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612066401037354754 1.21.0054Z7907551B 0003 BOSCH ME7.1/5
02612066411037354775 1.21.0124Z7907551C 0005 BOSCH ME7.1/5
02612066411037354549 1.21.0074Z7907551C 0003 BOSCH ME7.1/5
02612071341037360277 1.21.0214Z7907551E 0001 BOSCH ME7.1/5
02612071341037354808 1.21.0044Z7907551E 0001 BOSCH ME7.1/5
02612071371037360858 1.21.0124Z7907551D 0002 BOSCH ME7.1/5
02612071381037360874 1.21.0104Z7907551H 0002 BOSCH ME7.1/5
02612071381037354847 1.21.0064Z7907551H 0001 BOSCH ME7.1/5
02612072601037360860 1.21.0054Z7907551K 0002 BOSCH ME7.1/5
02612072601037360166 1.21.0044Z7907551K 0001 BOSCH ME7.1/5

Technische Fahrzeughinweise

OBD befindet sich auf der linken Seite der Fahrerseite, frei zugänglich links von den Pedalen.

Steuergerät-Hinweise

Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.