AUDI A6 (C4/4A) 4.2L V8 40V 253KW/344HP ME7.1/5
Steuergerät BOSCH ME7.1/5 · 344 CV (253 kW) · 4200 cc · Benzina aspirato
Steuergeräte-Datenbank ›
AUDI › AUDI A6 (C4/4A) 4.2L V8 40V 253KW/344HP ME7.1/5
Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.
✓ Tuning per Datei (Flash)
4 Firmware-Versionen
Datei für dieses Fahrzeug erhalten
Fahrzeugdaten
| Marke | AUDI |
| Modell | A6 (C4/4A) |
| Motor | 4.2L V8 40V 253KW/344HP ME7.1/5 |
| Serienleistung | 344 CV / 253 kW |
| Hubraum | 4200 cc |
| Kraftstoff | Benzina aspirato |
| Fahrzeugtyp | Auto |
Steuergerät
| Hersteller | BOSCH |
| Modell | ME7.1/5 |
| Speicher / EPROM | 29F400 PSOP44 4Mbit - Flash 256K x 16 |
Verfügbare Tuning-Optionen:
- Zündung bei Teillast
- Last Position Drosselklappe
- Einspritzung Teillast
- Einspritzung bei Volllast
- Zündungsbegrenzer
- Drehmomentbegrenzer
- Geschwindigkeitsbegrenzung
- Last Position Drosselklappe für Automatische Getriebe
- Luftmassenfluss
Firmware-Kennungen (4)
| Hardware-Nr. | Software-Nr. (Chip) | Version | Update-Software | Steuergerät |
|---|---|---|---|---|
| 0261206016 | 1037350095 | 1.21.014 | 4D0907558A 0002 | BOSCH ME7.1/5 |
| 0261206204 | 1037352836 | 1.21.005 | 4D0907558S 0008 | BOSCH ME7.1/5 |
| 0261206204 | 1037352416 | 1.21.019 | 4D0907558S 0007 | BOSCH ME7.1/5 |
| 0261206373 | 1037352378 | 1.21.016 | 4D0907559D 0002 | BOSCH ME7.1/5 |
Steuergerät-Hinweise
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Datei für dieses Fahrzeug erhalten
Werkzeuge zum Lesen und Schreiben dieses Steuergeräts
Weitere AUDI
100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP