AUDI A4 (B6/8E/8H) 1.8L 20V TURBO 120KW/161HP ME7.5

Steuergerät BOSCH ME7.5 · 163 CV (12 kW) · 1800 cc · Benzina sovralimentato

Steuergeräte-DatenbankAUDI › AUDI A4 (B6/8E/8H) 1.8L 20V TURBO 120KW/161HP ME7.5

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 30 Firmware-Versionen

Fahrzeugdaten

MarkeAUDI
ModellA4 (B6/8E/8H)
Motor1.8L 20V TURBO 120KW/161HP ME7.5
Serienleistung163 CV / 12 kW
Hubraum1800 cc
KraftstoffBenzina sovralimentato
FahrzeugtypAuto

Steuergerät

HerstellerBOSCH
ModellME7.5
Speicher / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Verfügbare Tuning-Optionen:

  • Haupt-zundung
  • Zündung im Leearlauf
  • Optimaler Zündwinkel
  • Ladedruckbegrenzer 4
  • Ladedruckbegrenzer 5
  • Ladedruck Reglerbegrenzung
  • Berechnung Motor Sollfüllung
  • Max. zulässiges Druckverhältnis für Diagnose
  • Abgastemperatur
  • Lambda-Anreicherung für Bauteileschutz
  • Drehzahlbegrenzer
  • Linearisierung Ladedruck
  • Lambda Fahrerwunsch
  • Klopfsensor Begrenzer
  • Maximale Füllung Ladedruck
  • Optimales Motormoment
  • Offset-Toleranz in Abhängigkeit vom zulässigen Moment
  • Zulässiges Moment aus der Pedalstellung in der Funktion überwach
  • Druckverhältnis je nach Ansauglufttemperatur
  • Max. zulässiges Druckverhältnis je nach Temperatur
  • Fahrerwunsch drehmoment
  • Drosselklappen-Sollwinkel
  • Pulsationkennfeld Variables SaugRohr

Firmware-Kennungen (30)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
02612068781037380902 1.42.0058E0909518F 0005 BOSCH ME7.5
02612068781037363323 1.42.0098E0909518F 0002 BOSCH ME7.5
02612068781037363670 1.42.0118E0909518F 0003 BOSCH ME7.5
02612068791037362598 1.42.0098E0909518G 0002 BOSCH ME7.5
02612068791037363669 1.42.0098E0909518G 0004 BOSCH ME7.5
02612074121037360984 1.21.0148E0906018AB 0004 BOSCH ME7.5
02612076361037362358 1.21.0214B0906018DC 0001 BOSCH ME7.5
02612077701037363085 1.42.0108E0909518R 0002 BOSCH ME7.5
02612077711037363037 1.42.0158E0909518S 0001 BOSCH ME7.5
02612077801037363054 1.42.0188E0909518Q 0001 BOSCH ME7.5
02612078541037363386 1.42.0178E0909518P 0001 BOSCH ME7.5
02612079341037366494 1.42.0368E0909518AA 0004 BOSCH ME7.5
02612079341037363497 1.42.0098E0909518AA 0001 BOSCH ME7.5
02612079341037366381 1.42.0228E0909518AA 0002 BOSCH ME7.5
02612079361037363499 1.42.0228E0909518AC 0001 BOSCH ME7.5
02612079361037366448 1.42.0118E0909518AC 0002 BOSCH ME7.5
02612079381037366495 1.42.0098E0909518AE 0004 BOSCH ME7.5
02612079391037366446 1.42.0118E0909518AF 0002 BOSCH ME7.5
02612079391037366883 1.42.0108E0909518AF 0003 BOSCH ME7.5
02612079391037363573 1.42.0218E0909518AF 0001 BOSCH ME7.5
02612082281037386802 1.42.0108E0909518AL 0005 BOSCH ME7.5
02612082281037369311 1.42.0358E0909518AL 0003 BOSCH ME7.5
02612082281037368069 1.42.0308E0909518AL 0002 BOSCH ME7.5
02612082301037368072 1.42.0088E0909518AK 0003 BOSCH ME7.5
02612082301037369307 1.42.0098E0909518AK 0004 BOSCH ME7.5
02612085121037369017 1.42.0168E0909518BA 0001 BOSCH ME7.5
02612085231037369355 1.42.0158E0909518BC 0010 BOSCH ME7.5
02612085241037386624 1.42.0088E0909518AQ 0020 BOSCH ME7.5
02612085241037372505 1.42.0238E0909518AQ 0010 BOSCH ME7.5
02612085251037372534 1.42.0138E0909518AR 0020 BOSCH ME7.5

Technische Fahrzeughinweise

OBD befindet sich unter dem Lenkrad, oberhalb der Pedale. Sichtbar oder versteckt durch Plastikabdeckung.

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata