LEXUS RX (AL20) 450h 3.5L V6 24V VVT-i 230kW/308HP DENSO

ECU DENSO D76F0196F1 · 313 CV (23 kW) · 3500 cc · Hybrid

ECU-databaseLEXUS › LEXUS RX (AL20) 450h 3.5L V6 24V VVT-i 230kW/308HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkLEXUS
ModelRX (AL20)
Motor450h 3.5L V6 24V VVT-i 230kW/308HP DENSO
Standaard vermogen313 CV / 23 kW
Cilinderinhoud3500 cc
BrandstofHybrid
VoertuigtypeAuto

ECU

FabrikantDENSO
ModelD76F0196F1
Geheugen / EPROMMIcro NEC D76F0196F1 - 1536 Kbit - 180000

Beschikbare tuning-opties:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Electronic throttle control
  • Electronic throttle control 2
  • Lambda correction f(IAT)
  • Lambda correction f(IAT) 2
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Lambda correction f(ECT) 4
  • Advance limiter
  • Lambda minimum value for components protection
  • Lambda fat-running limit for component protection
  • RPM Limiter
  • Lambda driver wish
  • Lambda driver wish 2
  • Exhaust gas temperature sensor
  • Exhaust gas temperature sensor 2
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-48Q42- 1.67.020348Q4200 DENSO D76F0196F1
89663-48Q43- 1.67.003348Q4300 DENSO D76F0196F1
89663-48Q44- 1.67.003348Q4400 DENSO D76F0196F1
89663-48T11- 1.67.003348T1100 DENSO D76F0196F1
89663-48T12- 1.67.003348T1200 DENSO D76F0196F1
89663-48V61- 1.67.003348V6100 DENSO D76F0196F1
89663-48V62- 1.67.003348V6200 DENSO D76F0196F1
89663-48Z31- 1.67.003348Z3100 DENSO D76F0196F1
89663-48Z41- 1.67.003348Z4100 DENSO D76F0196F1

ECU-notities

Microprocessor D76F0196F1 WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.