LEXUS GS (S160) GS 430 4.3L V8 224kW/300HP DENSO

ECU DENSO 275036-8730 · 305 CV (224 kW) · 4300 cc · Benzina aspirato

ECU-databaseLEXUS › LEXUS GS (S160) GS 430 4.3L V8 224kW/300HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 8 firmwareversies

Voertuiggegevens

MerkLEXUS
ModelGS (S160)
MotorGS 430 4.3L V8 224kW/300HP DENSO
Standaard vermogen305 CV / 224 kW
Cilinderinhoud4300 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275036-8730
Geheugen / EPROMMICRO NEC 76F0038GD - 6144 Kbit - C0000

Beschikbare tuning-opties:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-30C80- 1.67.007330C8000 DENSO 275036-8730
89663-30600-A 1.67.03533060000 DENSO 275036-8730
89663-30612- 1.67.00733061200 DENSO 275036-8730
89663-30581- 1.67.00733058100 DENSO 275036-8730
89663-30851- 1.67.00633085100 DENSO 275036-8730
89663-30611- 1.67.00633061100 DENSO 275036-8730
89663-30584- 1.67.00533058400 DENSO 275036-8730
89663-30565- 1.67.01033056500 DENSO 275036-8730

ECU-notities

Microprocessor NEC 76F0038GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata