LEXUS IS (XE20) F 5.0L V8 311kW/423HP DENSO

ECU DENSO 275036-3560 · 423 CV (311 kW) · 5000 cc · Benzina aspirato

ECU-databaseLEXUS › LEXUS IS (XE20) F 5.0L V8 311kW/423HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 21 firmwareversies

Voertuiggegevens

MerkLEXUS
ModelIS (XE20)
MotorF 5.0L V8 311kW/423HP DENSO
Standaard vermogen423 CV / 311 kW
Cilinderinhoud5000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275036-3560
Geheugen / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Base timing
  • Base timing 2
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Lambda driver wish 2
  • Speed limiter
  • Specific injection pressure
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (21)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-53G50- 1.51.029353G5000 DENSO 275036-3560
89663-53B90- 1.67.012353B9000 DENSO 275922-3410
89663-53B61- 1.67.013353B6100 DENSO 275922-3410
89663-53570-A 1.67.01035357000 DENSO 275922-3410
89663-53G40-A 1.67.010353G4000 DENSO 275922-3410
89660-10510- 1.67.00501051000 DENSO 275922-3410
89663-53580- 1.67.01135358000 DENSO 275922-3410
89663-53A00-A 1.67.014353A0000 DENSO 275922-3410
89663-53A20- 1.67.005353A2000 DENSO 275922-3410
89663-53A10-A 1.67.010353A1000 DENSO 275922-3410
89663-53A01- 1.67.057353A0100 DENSO 275922-3410
89663-53B80- 1.67.005353B8000 DENSO 275922-3410
89663-53M10- 1.51.005353M1000 DENSO 275922-3410
89663-53G60- 1.67.006353G6000 DENSO 275922-3410
89663-53B70- 1.67.010353B7000 DENSO 275922-3410
89663-53M00- 1.51.010353M0000 DENSO 275922-3410
89663-53G70- 1.67.013353G7000 DENSO 275922-3410
89663-53560-A 1.67.01035356000 DENSO 275922-3410
89663-53740- 1.51.01035374000 DENSO 275922-3410
89663-53M20- 1.51.010353M2000 DENSO 275922-3410
89663-53G80-A 1.67.011353G8000 DENSO 275922-3410

ECU-notities

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata