LEXUS RC(XC10) 350 3.5L V6 228kW/306HP DENSO

ECU DENSO 275922-3410 · 310 CV (228 kW) · 3500 cc · Benzina aspirato

ECU-databaseLEXUS › LEXUS RC(XC10) 350 3.5L V6 228kW/306HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 10 firmwareversies

Voertuiggegevens

MerkLEXUS
ModelRC(XC10)
Motor350 3.5L V6 228kW/306HP DENSO
Standaard vermogen310 CV / 228 kW
Cilinderinhoud3500 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275922-3410
Geheugen / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-24330- 1.67.00932433000 DENSO 275922-3410
89663-24270- 1.67.00532427000 DENSO 275922-3410
89663-24241 1.67.00732424100 DENSO 275922-3410
89663-24341- 1.67.00532434100 DENSO 275922-3410
89663-24230- 1.67.00932423000 DENSO 275922-3410
89663-24340- 1.67.00632434000 DENSO 275922-3410
89663-24220- 1.67.00532422000 DENSO 275922-3410
89663-24240-A 1.67.01332424000 DENSO 275922-3410
89663-24331- 1.67.00532433100 DENSO 275922-3410
89663-24231- 1.67.00532423100 DENSO 275922-3410

ECU-notities

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata