MERCEDES M CLASS W163 ML270 2.7L 20V CDI 120kW/161HP EDC15

Calculateur BOSCH EDC15C6 · 163 CV (12 kW) · 2700 cc · Diesel sovralimentato

Base de données calculateursMERCEDES › MERCEDES M CLASS W163 ML270 2.7L 20V CDI 120kW/161HP EDC15

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 10 versions firmware

Données véhicule

MarqueMERCEDES
ModèleM CLASS W163
MoteurML270 2.7L 20V CDI 120kW/161HP EDC15
Puissance d'origine163 CV / 12 kW
Cylindrée2700 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleEDC15C6
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Injection pour le capteur de pression turbo 1
  • Injection pour le capteur de pression turbo 2
  • Limiteur de pression turbo
  • Pression turbo
  • Controle van EGR
  • Limiteur de couple
  • Limiteur de fumées
  • Pression specifique injection
  • Débit de masse d'air
  • Temps d'overboost

Identifiants firmware (10)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02810102831037351225 1.05.023 BOSCH EDC15C6
02810102831037351225 1.05.019 BOSCH EDC15C6
02810103101037351226 1.05.002 BOSCH EDC15C6
02810105181037351393 1.05.004 BOSCH EDC15C6
02810105371037351544 1.05.009 BOSCH EDC15C6
02810105461037351417 1.05.022 BOSCH EDC15C6
02810105461037351417 1.05.028 BOSCH EDC15C6
02810107961037351671 1.05.032 BOSCH EDC15C6
02810114071037365119 1.05.006 BOSCH EDC15C6
02810114081037365120 1.05.051 BOSCH EDC15C6

Notes calculateur

original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius.