MERCEDES E CLASS W211 E55 AMG 5.4L V8 355kW/476HP ME2.8

Calculateur BOSCH ME2.8 · 483 CV (355 kW) · 5400 cc · Benzina sovralimentato

Base de données calculateursMERCEDES › MERCEDES E CLASS W211 E55 AMG 5.4L V8 355kW/476HP ME2.8

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 2 versions firmware

Données véhicule

MarqueMERCEDES
ModèleE CLASS W211
MoteurE55 AMG 5.4L V8 355kW/476HP ME2.8
Puissance d'origine483 CV / 355 kW
Cylindrée5400 cc
CarburantBenzina sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleME2.8
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Avance principale
  • Lambda/AFR à pleine charge
  • Lambda/AFR en charge partielle
  • Avance optimal
  • Correction limiteur suralimentation pour le APS/BPS
  • Référence charge pedal / position du papillon
  • Gestion de remplissage du moteur
  • Limiteur de tours
  • Limiteur de tours pour LSD
  • Linéarisation pression turbo
  • Limiteur de vitesse
  • Couple maximale indiqué
  • Retard pression absolue du collecteur
  • Débimetre secondaire
  • Couple admissible relative de la position de la pédale à limitation de couple
  • Remplissage de moteur demandé
  • Correction de pulsation apport variable

Identifiants firmware (2)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
11315305911037377816 1.16.011 BOSCH ME2.8
11315362791037365235 1.16.019 BOSCH ME2.8

Notes calculateur

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.